BACK TO PRODUCT CATEGORY
PT-RX110
Key Features

Laser 1-chip DLP, 10400 lumens (centre), XGA

High brightness and excellent image quality with laser light source

Maintenance free up to 20000 hours with dust-resistant optical block and long lasting laser engine

Free 360 degrees installation

10,000:1 contrast ratio
  PT-RZ970 PT-RW930 PT-RX110
Brightness

10 000 lm (center)

9 400 lm (ANSI)

10 000 lm (center)

9 400 lm (ANSI)

10 400 lm (center)

10 000 lm (ANSI)

Resolution

WUXGA

(1920x1200)

WXGA

(1280x800)

XGA

(1024x768)

Contrast

10,000:1 (All White/All Black) (Dynamic Contrast3)

10,000:1 (All White/All Black) (Dynamic Contrast3) 10,000:1 (All White/All Black) (Dynamic Contrast3)

 

High Picture Quality and Long-lasting Reliability

  • Combines 1-Chip DLP™ imaging with proprietary SOLID SHINE laser technology for immersive picture quality at 10,400 lm (center) of brightness*1
  • Dynamic Light Control for 10,000:1 contrast*2
  • Accurate white balance and color reproduction in any projection mode
  • Long-lasting picture quality
  • Detail Clarity Processor 3 clarifies the finest details
  • System Daylight View 2 ensures sharp and vivid images in bright environments

Consistently Stable and Reliable Performance

  • Dust-resistant structure with airtight optical block
  • Dual-drive laser optical engine ensures reliable 24//7 operation with light source failover protection
  • Up to 20,000 hours of continuous maintenance-free operation*3
  • Selectable operational modes extend service life to up to 10 years*4
  • Efficient cooling system for stable operation in ambient temperatures of up to 45 °C (113 °F)*5
  • High-speed backup input switching

Versatile System and Installation Flexibility

  • Shares optional lenses with Panasonic 1-Chip DLP™ projector family
  • Compact body and free 360-degree installation (vertical and horizontal)
  • DIGITAL LINK supports transmission of uncompressed full HD video and control commands through a single CAT 5e or higher STP cable for distance up to 150 m (492 ft)*6
  • Geometric Adjustment for specially shaped screens

 

*1 PT-RZ970/RW930 features brightness of 10,000 lm (Center), and PT-RX110 features 10,400 lm (Center), *2 With Dynamic Contrast Mode set to 3, *3 At 20,000 hours, projector brightness will have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after every 20,000-hour period (approximately). Light source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period, *4 With operating Mode set to Long Life 3, in which mode brightness is lowered to 1,900 lm. 24 hours/day x 365 days/year x 10 years = 87,600 hours. Replacement of parts other than the light source may be required in a shorter period, *5 Light output may be reduced to protect the projector depending on environmental conditions, *6 150 m (492 ft) transmission available only with ET-YFB200G DIGITAL LINK Switcher for signals up to 1080/60p (dot-clock frequency 148.5 MHz). Transmission distance is up to 100 m (328 ft) in other cases

Show more

Specifications

Power Supply AC100 - 240V 10.4-5.0A 50Hz/60Hz
Power Consumption 1,050W NORMAL: 742W ECO: 617W LONG LIFE1: 410-588 LONG LIFE 2: 375-588W LONG LIFE 3: 349-588W SHUTTER: 82W STANDBY MODE [ECO]*1: 0.2W STANDBY MODE [NORMAL]: 3W STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W *Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft), ICE62087: 2008 Broadcast contents, Picture mode: Standard, Dynamic Contrast2
BTU Value Max 3,584 BTU
Lens | PT-RX110B/W Powered zoom/focus lenses (1.8-2.5:1), F 1.7-1.9, f 25.6-35.7 mm
Lens | PT-RX110LB/LW Optional powered zoom/focus lenses and xed-focus lens
Light Source Laser Diode Laser class 1(Class3R for US models) Luminance life for set: 20,000 hours at half luminance (normal)/ 24,000 hours at half luminance (Eco) * Temperature: 30°C (86°F), Altitude 700m (2,297 ft), Dust: 0.15mg/m3 Dynamic Contrast3 43,800 hours at constant luminance (LONG LIFE1) 61,320 hours at constant luminance (LONG LIFE2) 87,600 hours at constant luminance (LONG LIFE3)
Screen Size 1.27 - 15.24 m (50 - 600 inches) (4:3 aspect ratio) *1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (4:3 aspect ratio ) *2.54 - 7.62 m (100 - 350 inches) with the ET-DLE030 (4:3 aspect ratio)
Brightness*3 10,400 lumens (Center)*2/ 10,000 lumens*3 10,000 lumens (Half luminance) (NORMAL) 8,000 lumens (Half luminance) (ECO) 3,900 lumens (Constant luminance) (LONG LIFE1) 3,300 lumens (Constant luminance) (LONG LIFE2) 2,700 lumens (Constant luminance) (LONG LIFE3)
Center-to-Corner Uniformity*3 90%
Contrast*3 10,000:1 (All White/All Black) (Dynamic Contrast3)
Scanning Frequency | HDMI/DVI-D fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162 MHz 525i (480i)*4, 625i (576i)*4, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p, VGA (640 x 480) - WUXGA (1920 x 1200) compatible with non-interlaced signals only
Scanning Frequency | RGB fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 20 - 162 MHz
Scanning Frequency | YPBPR (YCBCR) 525i (480i): fH 15.73 kHz; fV 59.9 Hz, 625i (576i): fH 15.63 kHz; fV 59.9 Hz, 525p (480p): fH 31.50 kHz; fV 60 Hz, 625p (576p): fH 31.25 kHz; fV 50 Hz, 750 (720)/60p: fH 45.00 kHz; fV 60 Hz, 750 (720)/50p: fH 37.50 kHz; fV 50 Hz, 1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency | Video/S-Video fH: 15.73 kHz, fV: 59.9 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical Axis Shift Vertical: +60%, -16%(powered), Horizontal: +30%, -10% (When using the ET-DLE085/DLE105, +28%, -10%) (powered) NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed.
Installation Ceiling/floor, front/rear, 360 degree free installation
Terminals | HDMI In HDMI 19-pin x 1, Deep Color, compatible with HDCP
Terminals | DVI-D In DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, for single link only
Terminals | RGB 1 In BNC x 5
Terminals | RGB 1 In | R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 1 In | Y, PB, PR (Y, CB, CR) Y:1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 1 In | Y/C Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Terminals | RGB 1 In | Video 1.0Vp-p, 75 ohms
Terminals | RGB 2 In D-sub HD 15-pin (female) x 1
Terminals | RGB 2 In | R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 2 In | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals | Serial/Multi Projector Sync In D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | Serial/Multi Projector Sync Out D-sub 9-pin (male) x 1 for link control
Terminals | Remoter 1 In M3 jack x 1 for wired remote control
Terminals | Remoter 1 Out M3 jack x 1 for link control (for wired remote control)
Terminals | Remoter 2 In D-sub 9-pin (female) x1 for external control (parallel)
Terminals | LAN/DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compliant with PJLink™(Class 1) Deep Color, HDCP
Power Cord Length 3.0 m (9 ft 10 in)
Cabinet Materials Molded plastic
Dimensions (W x H x D) | PT-RX110B/RX110W 498 x 200*5 x 581mm (19-19/32 x 7-7/8*5 x 22-7/8in ) with supplied lens
Dimensions (W x H x D) | PT-RX110LB/RX110LW 498 x 200*5 x 538 mm (19-19/32 x 7-7/8*5 x 21-3/16in) without lens
Weight | PT-RX110B/RX110W Approx. 23.2kg (51.1lbs) with supplied lens
Weight | PT-RX110LB/RX110LW Approx. 22.4kg (49.4lbs) without lens
Operation Noise 41dB (37dB[QUIET1] / 35dB[QUIET2])
Operating Temperature 0-45 °C (32-113 °F) *6
Operating Humidity 10%-80% (no condensation)
Note *1 When the STANDBY MODE is set to Eco, network functions such as power on over the LAN will not operate. *2 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the ISO/IEC 21118:2012 international standards. *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal). *5 with legs at shortest position. *6 Limits the luminance when used in locations from 0m to 2,700m (0ft to 8,858ft) above sea level at ambient temperatures of 35°C (95°F) or higher, or from 2,700m to 4,200m (8,858ft to 13,780ft) above sea level at ambient temperatures of 25°C (77°F) or higher.
Brightness 10,400 lumens (Center)/ 10,000 lumens
Resolution XGA 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)
Technology 1-Chip DLP Laser
DLP™ Chip | Panel Size 17.8 mm (0.7 in) diagonal (4:3 aspect ratio)
DLP™ Chip | Display Method DLP™ chip x 1, DLP™ system
DLP™ Chip | Pixels 786,432 (1024 x 768) x 1, total of 786,432 pixels