Main product image
BACK TO PRODUCT CATEGORY
WJ-NX300
Key Features

Secure & High Compression Recording

PC-less non-VMS surveillance solution

Scalable storage

High reliability and high efficiency data reading/writing
 WJ-NX300
 
iPRO Extreme Platform 

The WJ-NX300 is a H.265/H.264 high-throughput Network Video Recorder featuring integrated GUI and robust embedded IP security, enabling a secure end-to-end, PC-less surveillance solution for mission-critical applications. Supporting full data encryption streaming recording for all i-PRO Extreme cameras which comply to FIPS 140-2 Level 1 standards, the NVR keeps your video surveillance secured from spoofing and snooping activities.

The WJ-NX300 offers easy installation and operation, high reliability and is therefore a cost effective alternative when considering the TCO of your surveillance system.

The PC-less surveillance solution does not require any computer, neither for the configuration of the system, nor for operation. Its very easy setup features automatic Security System configuration wizard. Therefore, users can “Easy Start” the WJ-NX300 within four steps to get the setting of the recorder and cameras completed in just a few minutes from the main display. Due to its two HDMI outputs, the WJ-NX300 enables users to operate all features from the main display without running a PC. The main and sub displays support multi-screen viewing, whereas the main screen supports up to 4K resolution, and the sub screen up to Full-HD resolution.
The image search with thumbnails makes it easy to search and find images within the surveillance data, and due to the high speed copy data transfer speed is 3 times greater than with previous NVRs.

TURBO-RAID functions can ensure reliability of data and high-performance throughput. Also, recovery time in case of a system crash is cut to half the time of a general network recorder.

Moreover, the WJ-NX300 can accelerate data access (reading/writing) by the original file system, therefore efficiently controlling the hardrive.
For stable recording and operation, the NVR is equipped with a momentary power failure resistance, so it keeps working and recording in case of an instantaneous voltage drop within 200ms.

Secure Communication works between the cameras and NVR as well as between the NVR and the applications, delivering a full secure end-to-end solution. It protects devices from cyber attacks and prevents leakage of data on communication networks as well as leakage of the video through password-protected and alteration detection.

The WJ-NX300 is aimed at applications such as Public Safety, Transportation (airports, trains or subways), Banking, Retail, Hospitals, Education, Factories and much more.

Secure & High Compression Recording

  • 16 ch. expandable to 32 ch. camera input
  • Supports H.265 / H.264 mixed recordings
  • 512 Mbps total through put (including 256 Mbps recording bandwidth)
  • Symantec device certificates pre-installed*
 Extreme Data Security

PC-less non VMS surveillance solution

  • No camera license fees with a default number of cameras; no annual license updates required
  • Built-in GUI and Dual HDMI (4K / FHD) outputs
  • Automatic camera configuration

Scalable storage

  • (4) integrated drive-bays RAID 1 / 5 / 6
  • External storage expansion up to 132 TB

High reliability and high efficiency data reading/writing

  • Dynamic HDD power management increases HDD life
  • TURBO-RAID for quick RAID recovery without sacrificing recording bandwidth and performance
  • Eco-writing : Acceleration of data access (reading/writing) by original file system
  • Instantaneous power failure measures: Normal operation at instantaneous power failure within 200 ms; safe shutdown at power failure of 200ms or more

    Long-life control - HDD stand-by control individually

* Secure Communication kits necessary

Show more

Technology

Click an icon to find out more about the technology used

Onvif Logo Profiles S CMYK i-PRO EXTREME
  • Brochures
Product
Image Data
CAD Data
Technical
Firmware
Release Notes
Marketing
Spec Sheets
Brochures

Service and Support
  • WJ-NX300 Product Image (png)
    WJ-NX300 Product Image (png)
    H.265/H.264 high-throughput and scalable embedded TURBO-RAID System Recorder WJ-NX300 Product Image 
    Mon, 01/10/2018 - 13:03
    Download png - 174.08 KB
  • WJ-NX300 Firmware
    WJ-NX300 Firmware
    Note: Basic Procedure (Click here)Note: Please accept downloading service for the file of firmware version 2.xx are unavailable. We apology any inconvenience due to this.
    Mon, 01/10/2018 - 13:01
    Download zip - 76.83 MB

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no key services available.

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no other services available.

Specifications

Specification documents
Power Consumption approx. 72 W
Power Source WJ-NX300K/G (220 - 240 V AC) : 220 V-240 V AC 50 Hz/60 Hz WJ-NX300K (120 V AC) : 120 V AC 50 Hz/60 Hz
Digital Zoom Live / Play: 1.25x 1.5x 1.75x, 2x, 2.5x, 3x, 3.5x 4x, 5x, 6x, 7x, 8x (only for 1-screen or 4-screen)
Recording Mode Event, Schedule, Emergency
Dimensions 420 mm(W)×88 mm(H)×370 mm(D) (From Rack Mount Bracket 350 mm) {16-9/16 inches(W)×3-7/16 inches(H)×14-9/16 inches (D)}(From Rack Mount Bracket (13-13/16")) (excluding rubber feet and projections)
Audio Output Connector −10 dBv, 600 Ω, unbalanced ×1 (RCA pin jack)
Network Interface 2x 10BASE-T / 100BASE-TX / 1000BASE-T (RJ45)
Camera Title Up to 16 Characters
Clock Display Time : 12H/24H, Date : 5 formats
System Log Operator access (500), Network error (100), Error (1,000), Event (1000), Operation (500)
Supported Protocol IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP, RTP, RTSP, ICMP, ARP IPv6: ICMPv6
No. of Simultaneous Users 16 or less
Safety/EMC Standard WJ-NX300K/G (220 - 240 V AC) : CE (EN60065, EN55032 ClassB, EN55024), EAC WJ-NX300K (120 V AC) : cUL (UL60065), FCC Part15 ClassA
Ambient Operating Temperature Main body : +5 °C to +45 °C (41 °F to 113 °F), Mouse (provided) : +5 °C to +40 °C (41 °F to 104 °F)
Ambient Operating Humidity 5 % to 90 % (without condensation)
Mass (Approx.) When no HDD is installed: 7.0 kg {15.4 lbs}
Type 8.89 cm (3.5 inch) Serial ATA HDD, Up to 4x HDDs can be installed.
Copy File Format: Original Format / MP4 Recorded data of selected cameras and time date range can be copied to USB storage.
Maximum Capacity 22 HDD slots (with 2x WJ-HXE400 Extension Units, 9x HDDs installed in a extension unit) Up to 6 TB will be supported.
SD Memory Data Download Images recorded in the SD card in the i-PRO series cameras can be transferred to the recorder automatically. (H.265/H.264)
Supported Image Resolution •Aspect ratio [4 : 3] 4000x3000, 2560x1920, 2048x1536, 1280x960, 800x600, 640x480 •Aspect ratio [16 : 9] 3840x2160, 2560x1440, 1920x1080, 1280x720, 640x360 •Aspect ratio [1 : 1] 2992x2992, 2816x2816, 2048x2048, 1280x1280 •Aspect ratio [9 : 16] 1080x1920, 720x1280, 360x640
Supported Audio Format G.711 for Onvif, G.726 (ADPCM) 32 kbps, AAC-LC
Multiscreen Mode [Main monitor] • Control screen 4 / 9 / 16 split screen display • Wide view screen 2 / 3 / 4 / 5 / 6 / 7 / 9 / 12 / 16 / 24 / 32 split screen display, 1 screen sequence, 4 / 9 / 16 split screen sequence [Sub monitor] 1 / 4 / 9 / 16 / 24 / 32 split screen display, 1 screen sequence, 4 / 9 / 16 split screen sequence
User Registration Up to 32 users
Summer Time User definable (using menu setup)
Partitioning User level - Camera (View & Control, No Access)
Security Method User authentication (ID and Password), Host authentication, Alteration detection, SSL/TLS
Additional Functions [NX Viewer] Alteration detection, Save as JPEG, Two times zoom, Print, Copy, Aspect ratio switching, fish eye correction, corridor display
Maximum Number of Cameras MAX. 32* (Default number of cameras : 16) * Two Additional Camera Kits WJ-NXE30 are necessary.
Pre-Alarm Recording Up to 15 seconds *When the delivery speed from the network camera is less than 4 Mbps.
Scheduled Recording Mode 16 programs, 6 time zones/day, Independent setup for each day of the week
Frame Rate/Camera Up to 60 fps (Depending on the camera)
User Level 3 Levels (Programmable)
External Storage 2x WJ-HXE400
Maximum Operating Altitude 2,000 m (6,562 feet) above sea level
Search Mode Search criteria : Time date, Playback by designating a timeline, VMD, Thumbnail
Time Synchronization Terminal (Master/Slave), NTP (Server/Client)
System Setup Setup page in English, French, Italian, Spanish, German, Russian, Portuguese, Thai, Simplified Chinese, Japanese
Spot Output Connector 1x 1 V [p-p] / 75 Ω (BNC) NTSC /PAL (selectable in setup menu)
Monitor (HDMI) Connector [Main monitor] HDMI 4K UHD(3840x2160p) /30Hz, 4K UHD(3840x2160p) /25Hz, 1920x1080p /60Hz, 1920x1080p /50Hz, 1920x1080i /60Hz,1920x1080i /50Hz [Sub monitor] HDMI 1920x1080p /60Hz, 1920x1080p /50Hz, 1920x1080i /60Hz,1920x1080i /50Hz
Mouse Connection Port 2 (Front 1, Rear 1)
Network Port 2x 10BASE-T / 100BASE-TX / 1000BASE-T (RJ45)
Required PC CPU: Intel® Core™ i7-860 or faster , RAM : 4 GB or more VRAM: 128 MB or more (Min. 64 MB), Microsoft® DirectX® 9.0c or later
Compatible Vendor Panasonic i-PRO series Network cameras, ONVIF NVT conformant camera and encoder
Supported Image Format H.265(HEVC), H.264, JPEG
360 Camera Dewarp Only 1ch display mode.
Maximum Recording Rate 256 Mbps or less
Maximum Band Width Total 512 Mbps or less
E-mail Upon Alarm or Warning
Remote Monitoring on Smartphone/Tablet 16 clients or less
Camera Control (Browser GUI) Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256), Auto mode, Click centering, Wheel zoom, Zoom reset, , Aux, Wiper (for WV-SUD638
Playback Control (Browser GUI) PLAY, Rev PLAY, Pause, Stop, FF, FR, Prev Record, Next Record, Prev Image, Next Image, Go to Date, Go to Last (30 s)
Search Mode (Browser GUI) Search criteria: Time date, Event type, VMD, Camera number
Display Mode (Browser GUI) 1 / 4 screen
Image Download (Browser GUI) File Format: Original Format / MP4 Recorded data of selected camera and time range can be downloaded to a PC. Viewer software can be downloaded separately.
Copy (Browser GUI) File Format: Original Format / MP4 Recorded data of selected cameras and time date range can be copied to USB storage.
Camera Title (Browser GUI) Up to 16 characters
Clock Display (Browser GUI) On the browser. Time: 12H/24H, Date: 5 formats
Alarm Control (Browser GUI) Reset
Digital Zoom (Browser GUI) Live/Play: 2x, 4x (only for 1-screen)
System Log (Browser GUI) Operator access (500), Network error (100), Error (1,000), Event (1000), Operation (500)
GUI Language (Browser GUI) Setup page in English, French, Italian, Spanish, German, Russian, Portuguese, Thai, Simplified Chinese, Japanese
Alarm Source (Alarm/Event) 9x Terminal inputs, 32x Camera alarms (Panasonic Alarm Protocol), 128x Command alarms
Event Mode (Alarm/Event) Off / On
Alarm Action (Alarm/Event) Alarm recording, e-mail notification, Alarm message, Camera positioning, Terminal output, Panasonic alarm protocol output, Buzzer, Indicator
Alarm Control (Alarm/Event) Reset
Event Log (Alarm/Event) 1000
Supported OS, Language (Viewer Software) Language of the software will be English or Japanese
Sub-Stream Recording 64 / 128 / 256 / 384 / 512 / 768 kbps
Re-Encoding 2Client
USB Storage USB 3.0 / USB 2.0 memory, USB 3.0 / USB 2.0 connected HDD (except bus powered device)
RAID (Hardware RAID) RAID 1, 5, 6
Alarm / Control Terminal [Alarm] Alarm input 1 - 9*, Alarm output**, Alarm reset input* [Control] Time adjustment input/output*, +5 V output***, Emergency recording input [Error/Warning] Network error output**, HDD error / Recording error output**, Camera error output**, Recorder error output** * Non-voltage make contact input, +3.3 V pull-up Approx. 23 kΩ ** Open collector output, 24 V DC, -200 mA max. *** +5V ±0.5 V 200 mA max.
Playback Control (Viewer Software) PLAY, Rev PLAY, Pause, FF, FR, Prev Record, Next Record, Prev Image, Next Image