The camera control unit AK-HCU200E allows a high-quality, long-distance optical fibre transmission camera system to be configured at low cost. The optical fibre transmission is supporting uncompressed video signals over a distance of approximately 1.000 m between the camera and camera control unit. The compact, lightweight unit measures 2U in height and is rack-mountable. Additionally the AK-HCU200E has a built-in cross converter supporting 720p/59,94 and 720p/50.
- Images
Associated Products
-
Studio camera with optical fiber transmissionAK-HC3800AK-HC3800 . The 2/3-type 2. Want to talk to Panasonic?.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no other services available.
Specifications
| Power Supply | 100 V to 240 V AC, 50Hz/60 Hz |
|---|---|
| Power Consumption | 170 W (Without CAMERA connected: 32 W) |
| Capacity for Supplying Power to a Camera | 190 V DC, 0.6 A |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Operating Humidity | 10 % to 90 % (no condensation) |
| Weight | Approx. 6.6 kg (approx. 14.6 lb) |
| Dimensions (W x H x D) | 424 mm x 88 mm x 400 mm (16-11/16 inches x 3-7/16 inches x 15-3/4 inches) Excluding protrusions |
| Video Output | HD-SDI/SD-SDI: 4 lines (2 lines shared with picture monitor output*1) Analog composite: 1 line (1 line shared with picture monitor output*1) |
| Output Format | 1080/59.94i, 1080/50i, 1080/29.97PsF*2, 1080/25PsF*2, 1080/23.98PsF*2, 720/59.94p, 720/50p |
| Return Input | HD-SDI/SD-SDI: 2 lines (switched depending on the setting) VBS: 1 line |
| Prompter Input | 1 line, Analog composite |
| Reference Input | 1 line (1 loop-through line) Black burst/tri-level*3 |
| Microphone Output | 2 lines (XLR, 3-pin, male), 0 dBm/600 Ω |
| Intercom | XLR, 5-pin, female Input: –55 dBu to –10 dBu Output: 100 mW (max.) |
| Communication | Intercom input/output: 2 lines (1/2*1) (0 dBm, 600 Ω, RTS/4W*1) PGM: 1 line, input (0 dBm/600 Ω) Tally input: Red, Green, 1 input each |
| ROP Interface | RS-422, 1 line, 12 V output |
| MSU Interface | RS-422, 1 line, GPI for control |
| LAN Port | 1 line (8-pin, RJ45) |
| Note | *1: Depending on the setting, only one of them can be selected at one time. *2: The 1080/29.97PsF, 1080/25PsF and 1080/23.98PsF formats must be selected at the camera. *3: The black burst signal and tri-level sync signal of the reference input are recognized automatically. |
